CAPAC-ZMBT Zinc 2-Mercaptobenzothiazole (CAS No. 155-04-4) CAS NO.155-04-4

CAPAC-ZMBT, (CAS No. 136-23-2), is a very fast primary or secondary (ultra) accelerator for natural and synthetic rubber. It is also a very rapid accelerator for NR and SBR lattices. Additionally it is used as an antioxidant in adhesive systems.

CAPAC-ZMBT is a Semi ultra-fast acceleratfNR, SBR, NBR, BR other diene rubbers. The critical cure temperature of CAPAC-ZMBT is approx. 120° C hence the dry rubber / NR latex based compounds are vulcanized quickly at 125° C. The state of cure developed by CAPAC-ZMBT is slightly lower than CAPAC-ZMBT; However, the scorch safety is much longer hence CAPAC-ZMBT can be used in place of CAPAC-ZMBT scorch control.
-CAPAC-ZMBT is mainly used NR & Synthetic Rubber Latex compounds along with CAPAC-ZDEC / CAPAC-ZDBC to improve the state of cure. CAPAC-ZMBT also improves the agingacteristics of NR Latex based vulcanizates.
-CAPAC-ZMBT does not influence the stability of latex compounds.

-CAPAC-ZMBT readily disperses in water in the presence of commonly used dispersing agents (e. G. Sodium salt of polymerized alkyl naphthalene sulfonic acid) is usually used as a 50% dispersion in water flatex compounding applications. CAPAC-ZMBT has a sensitizing effect on NR Latex due to its thixotropic nature this property favors NR latex foaming fthe production of Latex Foam Products. The latex compounds in which this property is not desired; The thixotropic effect can be overcome by stirring.
-When used fcompounding of Latex Foam manufacture; CAPAC-ZMBT CAPAC-ZMBT combinations give Latex Foam products with high compression modulus vulcanizable at 110° C. One can reduce the dosage of Zinc Oxide in Latex Foam compounds foptimization / adjustments in gelation periods.

-Normal dosages of Zinc Oxide Stearic Acid are necessary when CAPAC-ZMBT is used fdry rubber compounding. However; Dosage of Zinc Oxide can be reduced considerably fcertain specific applications.
-CAPAC-ZMBT can be activated by small dosages of basic accelerators such as TMTM, DPG, TMTD, ZDEC etc. even by other basic compounding materials. If required; Common acidic retarders Pilgard PVI can be used to delay the on-set of cure.
-High Accelerator-Low Sulfur cure systems based on CAPAC-ZMBT offer excellent heat resistance to NR vulcanizates. CAPAC-ZMBT also acts as an effective retarder fSulfur cure systems based on Thiurams & Dithiocarbamates as primary accelerators.

Abstract
CAPAC-ZMBT, (CAS No. 136-23-2), is a very fast primary secondary (ultra) acceleratfnatural synthetic rubber. It is also a very rapid acceleratfNR SBR lattices. Additionally it is used as an antioxidant in adhesive systems.

Identification
Name: Zinc 2-mercaptobenzothiazole(CAS No. 155-04-4 ),

Application
CAPAC-ZMBT in combination with CAPAC-ZDEC is mainly used in NR / Synthetic Rubber Latex compounds fthe manufacture of Latex Thread, Latex Foam other Latex based products. CAPAC-ZMBT in combination with basic secondary accelerators is used in Dry Rubber compounds fthe manufacture of Footwear products, Hot air cured products, molded extruded goods etc

Compounding Information
CAPAC-ZMBT is a Semi ultra-fast acceleratfNR, SBR, NBR, BR other diene rubbers. The critical cure temperature of CAPAC-ZMBT is approx. 120° C hence the dry rubber / NR latex based compounds are vulcanized quickly at 125° C. The state of cure developed by CAPAC-ZMBT is slightly lower than CAPAC-ZMBT; However, the scorch safety is much longer hence CAPAC-ZMBT can be used in place of CAPAC-ZMBT scorch control.
-CAPAC-ZMBT is mainly used NR & Synthetic Rubber Latex compounds along with CAPAC-ZDEC / CAPAC-ZDBC to improve the state of cure. CAPAC-ZMBT also improves the agingacteristics of NR Latex based vulcanizates.
-CAPAC-ZMBT does not influence the stability of latex compounds.

-CAPAC-ZMBT readily disperses in water in the presence of commonly used dispersing agents (e. G. Sodium salt of polymerized alkyl naphthalene sulfonic acid) is usually used as a 50% dispersion in water flatex compounding applications. CAPAC-ZMBT has a sensitizing effect on NR Latex due to its thixotropic nature this property favors NR latex foaming fthe production of Latex Foam Products. The latex compounds in which this property is not desired; The thixotropic effect can be overcome by stirring.
-When used fcompounding of Latex Foam manufacture; CAPAC-ZMBT CAPAC-ZMBT combinations give Latex Foam products with high compression modulus vulcanizable at 110° C. One can reduce the dosage of Zinc Oxide in Latex Foam compounds foptimization / adjustments in gelation periods.

-Normal dosages of Zinc Oxide Stearic Acid are necessary when CAPAC-ZMBT is used fdry rubber compounding. However; Dosage of Zinc Oxide can be reduced considerably fcertain specific applications.
-CAPAC-ZMBT can be activated by small dosages of basic accelerators such as TMTM, DPG, TMTD, ZDEC etc. even by other basic compounding materials. If required; Common acidic retarders Pilgard PVI can be used to delay the on-set of cure.
-High Accelerator-Low Sulfur cure systems based on CAPAC-ZMBT offer excellent heat resistance to NR vulcanizates. CAPAC-ZMBT also acts as an effective retarder fSulfur cure systems based on Thiurams & Dithiocarbamates as primary accelerators.

Handling Precautions
Fdetailed information on toxicological properties handling precautions please refer to the current Material Safety Data Sheet. This information sheet can be downloaded from our web site requested from the nearest our company should be consulted before handling this product.

Storage Shelf Life
It should be stored in dry, cool, ventilated room; Keep away from water, moisture, high temperature fire. This product has a shelf life of at least 12 months if stored in tightly closediginal container at room temperature.